 |
| Tools
> Pliers
> |
Special range, for complicated work in every electronics sector.
The most exact production methods and the use of special steel
sorts guarantee the highest degree of precision. For work at
barely-accessible points.
Type JCP = chrome plated, with blue dipped handle insulation. |
8170
Universal Plier
with long, flat jaws, and wire cutter for soft wire up to 1.4
mm Ø and hard wire up to 0.8 mm Ø.
| No. |
Pattern |
L mm |
L" |
 |
| 8170-175 |
JCP |
175 |
6.3/4 |
195 |
|
 |
 |
|
8171 Round-Nose Plier
narrow pattern, with oval-section jaws, without toothing.
| No. |
Pattern |
L mm |
L" |
|
| 8171-160 |
JCP |
160 |
6.1/2 |
105 |
|
 |
|
8172 Flat Nose Pliers, Straight Pattern
narrow pattern, with flat jaws and fine toothing.
| No. |
Pattern |
L mm |
L" |
|
| 8172-130 |
JCP |
130 |
5 |
75 |
| 8172-160 |
JCP |
160 |
6.1/2 |
100 |
| 8172-210 |
JCP |
210 |
8.1/4 |
165 |
|
 |
|
|
8172 Flat Nose Pliers, Angled Pattern
narrow pattern, with flat jaws and fine toothing.
| No. |
Pattern |
L mm |
L" |
|
| 8172 A-130 |
JCP |
130 |
5 |
75 |
| 8172 A-160 |
JCP |
160 |
6.1/2 |
110 |
| 8172 A-210 |
JCP |
210 |
8.1/4 |
160 |
|
 |
|
8174 Bevel Edge Side Cutters
narrow pattern. For cutting soft wire up to 1.25 mm Ø
and hard wire up to 0.5 mm Ø.
| No. |
Pattern |
L mm |
L" |
|
| 8174 -125 |
JCP |
125 |
5 |
70 |
| 8174 -150 |
JCP |
150 |
6 |
100 |
| 8174 -185 |
JCP |
185 |
7.1/4 |
135 |
|
 |
|
8175 Side Cutters without bevel edge
for flush cut off of non ferrous metals.
| No. |
Pattern |
L mm |
L" |
|
| 8175 -125 |
JCP |
125 |
5 |
70 |
| 8175 -150 |
JCP |
150 |
6 |
100 |
|
 |
|
|
8176 End Cutters
narrow pattern. For cutting soft wire up to 0.8 mm Ø
and hard wire up to 0.3 mm Ø.
| No. |
Pattern |
L mm |
L" |
|
| 8176 -130 |
JCP |
130 |
5 |
75 |
| 8176 -150 |
JCP |
150 |
6 |
100 |
|
 |
|
| This
is to inform all visitors to our website, that the Information
- technical and or otherwise, - given herein and or contained
herein. In our website pages, are as per the information available
with us from our principals M/s Gedore, Germany and Bolt Tech
USA, through their respective catalogs. It may be noted that
every efforts have been made to ensure that the information
reproduced herein is correct and true, as is available with
us. If there is any inaccuracy and/or discrepancy or error which
has crept in, Garage Equipment & Tools co. and any of its
partners, or employees, and or sister concerns, shall not be
liable in any manner what so ever against any loss and or damages,
directly or indirectly, caused to any party, whether in India,
and or beyond India. All errors and omissions are subject to
rectifications. It is also notified that all the information
given herein either by Garage Equipment & Tools co. and
or by M/s Gedore Germany and or M/s Bolt tech USA is for general
information only and clarifications if any required, they can
contact the respective parties for information. The publication
of this information on the web page is solely for the purpose
of General information about the products offered by M/s Gedore
or M/.s Bolttech. It is possible the Information may not be
complete, and may not contain full details about the range of
products offered. For any further details please contact Garage
Equipment & Tools co. |
|
|
