 |
| Tools
> Pliers
> |
136 SP Vice Grip C-Clamp
for clamping specially deep workpieces. Fitted with stop for
the upper jaw at constant cross sections. Nickel plated.
| No. |
L mm |
L" |
 |
 |
 |
| 136 SP 100 |
260 |
10 |
100 |
4 |
965 |
| 136 SP 200 |
260 |
10 |
200 |
8 |
1090 |
|
 |
 |
|
136 P Parallel Grip Wrench
with parallel clamping and automatic adjustment for one
hand use. Nickel plated.
| No. |
L mm |
L" |
|
|
|
| 136 P |
280 |
11 |
50 |
2 |
700 |
|
 |
|
|
137 Gedore Vice Grip Wrench
with adjustment screw and release lever. Forged, tempered
jaws and special jaw shape for secure gripping, clamping and
holding.
Gedore-Vanadium 31 CrV 3, Mat. No. 1.2208, Jaw body in high
tensile sheet steel. Nickel plated.
| No. |
L mm |
L" |
|
|
|
| 137-7 |
175 |
7 |
25 |
1 |
290 |
| 137-10 |
240 |
10 |
32 |
1.1/4 |
490 |
| 137-11 |
280 |
11 |
45 |
1.3/4 |
775 |
| 137-12 |
300 |
12 |
45 |
1.3/4 |
1010 |
|
 |
Resistant
at the critical point! Automatically welded upper jaw -absolutely
firm connection with the sheet-steel body.
For a secure grip. Well-conceived jaw design gua-rantees a three-point
contact with all material cross-sections. With groove for wire
in upper jaw. Thread
bore welded at bottom. No widening under most extreme loading.
Safe release. Release lever under constant pressure of special
spring.
 |
Clamp.
Flat material full contact at top, 2 point grip with lower
jaw. |
 |
Clamping
reach up to 45 mm material thickness is clamped firmly
and securely. |
 |
Holding
absolutely secure holding in the jaw tips, even in particularly
inaccessible cases. |
 |
Gripping
stripped bolt heads, firmly seated round parts, ripped
ends |
 |
Clamping
various cross sections and materials for drilling, welding,
etc. |
 |
Grasping
round materials are also clamped securely lengthwise. |
|
|
|
138 Welder's Vice Grip Wrench
for clamping bands and profile sections when welding.
With sturdy annealed cast iron jaws, resistant. Nickel
plated.
|
 |
| No. |
L mm |
L" |
|
| 138 |
280 |
11 |
870 |
|
 |
|
138 Welder's Vice Grip Wrench for Tubes
for clamping tubes and round stock when welding. With
sturdy annealed cast iron jaws, resistant. Nickel plated. |
 |
| No. |
L mm |
L" |
 |
|
|
| 138X |
280 |
11 |
10-90 |
3/8-3.1/2" |
900 |
|
 |
|
| This
is to inform all visitors to our website, that the Information
- technical and or otherwise, - given herein and or contained
herein. In our website pages, are as per the information available
with us from our principals M/s Gedore, Germany and Bolt Tech
USA, through their respective catalogs. It may be noted that
every efforts have been made to ensure that the information
reproduced herein is correct and true, as is available with
us. If there is any inaccuracy and/or discrepancy or error which
has crept in, Garage Equipment & Tools co. and any of its
partners, or employees, and or sister concerns, shall not be
liable in any manner what so ever against any loss and or damages,
directly or indirectly, caused to any party, whether in India,
and or beyond India. All errors and omissions are subject to
rectifications. It is also notified that all the information
given herein either by Garage Equipment & Tools co. and
or by M/s Gedore Germany and or M/s Bolt tech USA is for general
information only and clarifications if any required, they can
contact the respective parties for information. The publication
of this information on the web page is solely for the purpose
of General information about the products offered by M/s Gedore
or M/.s Bolttech. It is possible the Information may not be
complete, and may not contain full details about the range of
products offered. For any further details please contact Garage
Equipment & Tools co. |
|
|
