 |
| Tools
> Pullers
> |
1.40 Bearing Separators
For
removing taper roller and ball bearings, inner bearing races,
and other tightly-seated or thin-walled parts.
Operation:
To remove tightly-seated parts, the sharp edges of the separator
blades are pressed behind the part and it is then
withdrawn using the correct puller, No. 1.38. To avoid damage
to delicate parts, the flat surfaces of the separator blades
are used. This produces a large support surfface that prevents
deformation.
|
|
No.
|
Puller
|
|
|
 |
|
1.40/0
|
1.38/0
|
5-60
|
M 10
|
0,4 |
|
1.40/1
|
1 38/1
|
12-75
|
M 10
|
1,0 |
|
1.40/2
|
1.38/2
|
22-115
|
M 14x1,5
|
2,3 |
|
1.40/3
|
1.38/3
|
30-155
|
M 18x1.5
|
4,4 |
| 1.40/4 |
1.38/4 |
30-200 |
M
22x1,5 |
8,9 |
|
1.40/5
|
1.38/5
|
30-250
|
M 24x1,5
|
15,3 |
1.41 Separator and Puller Sets
Sets in sheet metal cases, comprising separator, puller
and extension rods.
|
No.
|
Contents
|
|
|
1.41/0
|
1.38/0 |
1.38/AV |
1.40/0 |
2,8 |
|
1.41/1
|
1.38/1 |
1.38/AV |
1.40/1 |
4,1 |
|
1.41/2
|
1.38/2 |
1.38/CV |
1.40/2 |
9,1 |
|
1.41/3
|
1.38/3 |
1.38/DV |
1.40/3 |
16,1 |
| 1.41/4 |
1.38/4 |
1.38/EV |
1.40/4 |
28,6 |
|
 |
 |
1.60 Wheel Hub Pullers
For cars and goods vehicles with wheel stud circles up to
225 mm.
|
No.
|
Wheel stud dia. (mm)
|
No. of hooks |
 |
|
|
1.60/3
|
225 |
3 |
G
3/4x200 |
4,0 |
| 1.60/4 |
225 |
4 |
G
3/4x200 |
4,5 |
| 1.60/5 |
225 |
5 |
G
3/4x200 |
5,0 |
| 1.60/H |
Spare
Hook |
- |
- |
0,5 |
|
|
|
1.61 Wheel Hub Pullers
For cars and goods vehicles with wheel stud circles up to
250 mm.
Simple use. Just place the plate with the spindle on the centre
marking of the axle and fold back the hooks onto the plate.
With swivelling nut holders always lying flat on the hub to
prevent wheel stud damage.
|
No.
|
Wheel stud dia. (mm)
|
No. of hooks |
|
|
|
1.61/3
|
250 |
3 |
G
3/4x200 |
5,0 |
| 1.61/4 |
250 |
4 |
G
3/4x200 |
5,6 |
| 1.61/5 |
250 |
5 |
G
3/4x200 |
6,2 |
| 1.61/H |
Spare
Hook |
- |
- |
0,6 |
|
 |
|
1.62 Wheel Hub Pullers
For goods vehicles with wheel stud circles up to 350 mm.
With swivelling nut holders always lying flat on the hub to
prevent wheel stud damage. This tool may also be used with the
hydraulic aid without requiring a reduction bushing.
|
No.
|
Wheel stud dia. (mm)
|
No. of hooks |
|
|
|
1.62/8
|
350 |
8 |
G
1x310 |
10,5 |
| 1.61/H |
Spare
hook |
- |
- |
0,6 |
|
 |
|
1.64 Impact Drive Shaft Puller
Suitable for drive shafts with 4 or 5 apertures (e.g. Opel,
Ford).
Operations:
The puller is attatched to the drive shaft flange using the
nuts of the wheel bolts. By striking the spindle head with the
sliding hammer, the shaft may be removed easily and without
damage.
|
No.
|
wheel stud dia. (mm)
|
|
|
|
1.64/1
|
100-500 |
max.
14 |
3,8 |
|
 |
|
| This
is to inform all visitors to our website, that the Information
- technical and or otherwise, - given herein and or contained
herein. In our website pages, are as per the information available
with us from our principals M/s Gedore, Germany and Bolt Tech
USA, through their respective catalogs. It may be noted that
every efforts have been made to ensure that the information
reproduced herein is correct and true, as is available with
us. If there is any inaccuracy and/or discrepancy or error which
has crept in, Garage Equipment & Tools co. and any of its
partners, or employees, and or sister concerns, shall not be
liable in any manner what so ever against any loss and or damages,
directly or indirectly, caused to any party, whether in India,
and or beyond India. All errors and omissions are subject to
rectifications. It is also notified that all the information
given herein either by Garage Equipment & Tools co. and
or by M/s Gedore Germany and or M/s Bolt tech USA is for general
information only and clarifications if any required, they can
contact the respective parties for information. The publication
of this information on the web page is solely for the purpose
of General information about the products offered by M/s Gedore
or M/.s Bolttech. It is possible the Information may not be
complete, and may not contain full details about the range of
products offered. For any further details please contact Garage
Equipment & Tools co. |
|
|
