 |
| Tools
> Pullers
> |
 |
1.37 Cylinder Liner Puller, complete with support brace
Suitable for removing large ball bearings and bearing outer
races.
Operation:
The extraction jaws are spread by turning the nut. The newly
developed spreading system enables a simple, step free and time
saving adjustment to the desired diameter to be made. The sharp
edged sections of the extraction jaws seat flush beneath when
spread.
|
No.
|
|
|
|
 |
|
1.37/2
|
60-130 |
G
1/2 |
36 |
6,8 |
|
 |
|
1.38 Separator Pullers
These separator pullers are used together with the bearing
separators, No. 1.40. The tension bolts are screwed into the
threaded holes in the bearing separators.
|
No.
|
for separator
|
a |
b |
|
|
|
1.38/0
|
1.40/0 |
40-120 |
160 |
M 10 |
1,0 |
| 1.38/1 |
1.40/1 |
60-165 |
230 |
M 10 |
2,5 |
| 1.38/2 |
1.40/2 |
70-215 |
250 |
M 14x1,5 |
3,8 |
| 1.38/3 |
1.40/3 |
90-300 |
270 |
M 18x1,5 |
7,2 |
| 1.38/4 |
1.40/4 |
125-380 |
350 |
M 22x1,5 |
11,3 |
| 1.38/5 |
1.40/5 |
140-440 |
400 |
M 24x1,5 |
18,0 |
|
 |
|
1.38 Extension Rods
For separator puller No. 1.38
|
No.
|
for puller
|
 |
|
|
|
| 1.38/AV |
1.38/0, 1.38/1 |
100 |
12 |
M 10 |
0,25 |
| 1.38/CV |
1.38/2 |
100 |
17 |
M 14x1,5 |
0,50 |
| 1.38/DV |
1.38/3 |
100 |
19 |
M 18x1,5 |
0,65 |
| 1.38/EV |
1.38/4 |
200 |
24 |
M 22x1,5 |
2,10 |
| 1.38/FV |
1.38/5 |
200 |
27 |
M 24x1,5 |
2,70 |
|
 |
|
| This
is to inform all visitors to our website, that the Information
- technical and or otherwise, - given herein and or contained
herein. In our website pages, are as per the information available
with us from our principals M/s Gedore, Germany and Bolt Tech
USA, through their respective catalogs. It may be noted that
every efforts have been made to ensure that the information
reproduced herein is correct and true, as is available with
us. If there is any inaccuracy and/or discrepancy or error which
has crept in, Garage Equipment & Tools co. and any of its
partners, or employees, and or sister concerns, shall not be
liable in any manner what so ever against any loss and or damages,
directly or indirectly, caused to any party, whether in India,
and or beyond India. All errors and omissions are subject to
rectifications. It is also notified that all the information
given herein either by Garage Equipment & Tools co. and
or by M/s Gedore Germany and or M/s Bolt tech USA is for general
information only and clarifications if any required, they can
contact the respective parties for information. The publication
of this information on the web page is solely for the purpose
of General information about the products offered by M/s Gedore
or M/.s Bolttech. It is possible the Information may not be
complete, and may not contain full details about the range of
products offered. For any further details please contact Garage
Equipment & Tools co. |
|
|
