|
| Tools
> Pullers
> |
|
1.07 Universal Pullers, with triple grip
For use as outside and inside puller. The even load distribution
on the 3 pulling hooks guarantees secure grip
and central pulling.
Hooks in special lengths available.
Hooks 1.06/AV (clamping reach 200 mm) for 1.07/1 and 1.07/1
A, and hooks 1.06/BV (clamping reach 300 mm) for 1.07/2 and
1.07/2A.
|
No.
|
a1
|
a2
|
b
|
 |
|
c
|
d
|
e
|
max.to
|
|
|
1.07/1
|
90
|
140
|
100
|
M
|
14x1,5x140
|
17
|
22
|
12
|
3
|
3
|
1,4 |
|
1.07/1 A
|
130
|
180
|
100
|
M
|
14x1,5x140
|
17
|
22
|
12
|
3
|
3
|
1,6 |
|
1.07/2
|
160
|
220
|
150
|
G
|
1/2x210
|
22
|
30
|
18
|
5
|
3,5
|
3,6 |
|
1.07/2A
|
200
|
260
|
150
|
G
|
1/2x210
|
22
|
30
|
18
|
3,5
|
5
|
4,0 |
|
 |
 |
1.07/4 Universal Pullers,
with triple grip and radially-adjustable arms. Just like our
standard model No. 1.06, this puller is designed for all branches
of industry, but particularly for the construction of electric
motors. It is also suitable
for removing heavy, multistage pulley wheels, flywheels, gear
wheels, etc. |
|
Pins
are used to lock the arms at 120° to each other
on the hub. When the clamping nut is slackened off, the arms
may be moved radially into any desired position.
The clamping reach may be extended to 490 mm by using extensions
No. 1.06/CV, 1.06/DV and 1.06/EV.
The
spindle may be replaced by the hydraulic spindle 1.06/HSP.
This
puller may also be used with the hydraulic aid without requiring
any reduction bushing.
| No. |
a |
b |
|
|
c |
d |
e |
max. to |
|
| 1.07/4 |
450 |
530 |
G
1x360 |
36 |
36 |
28 |
6,5 |
10 |
19,0 |
|
 |
|
|
1.10
Universal Pullers, twin grip
The reliable, heavy-duty model for the removal of sheaves,
wheels, ball bearings, etc. The double hook ends, wide or narrow,
grip automatically.
The wide hook ends of the puller 1.10/2 and 1.11/2
possess 8 mm slots, so that sheaves or gears
may also be pulled off using 8 mm bolts.
| No. |
a |
b |
|
|
c1 |
c2 |
d |
e |
max. to |
|
| 1.10/1 |
90 |
80 |
M
14x1,5x125 |
17 |
17 |
10 |
7 |
2 |
2 |
0,7 |
| 1.10/2 |
160 |
130 |
M 18x1,5x170 |
19 |
24 |
20 |
13 |
3 |
5 |
2,0 |
1.11
Pullers, triple grip
Otherwise as described above.
| No. |
a |
b |
|
|
c1 |
c2 |
d |
e |
max. to |
|
| 1.11/1 |
90 |
80 |
M
14x1,5x125 |
17 |
17 |
10 |
7 |
2 |
3 |
0,9 |
| 1.11/2 |
160 |
130 |
M 18x1,5x170 |
19 |
24 |
20 |
13 |
3 |
7,5 |
2,7 |
|
 |
|
| This
is to inform all visitors to our website, that the Information
- technical and or otherwise, - given herein and or contained
herein. In our website pages, are as per the information available
with us from our principals M/s Gedore, Germany and Bolt Tech
USA, through their respective catalogs. It may be noted that
every efforts have been made to ensure that the information
reproduced herein is correct and true, as is available with
us. If there is any inaccuracy and/or discrepancy or error which
has crept in, Garage Equipment & Tools co. and any of its
partners, or employees, and or sister concerns, shall not be
liable in any manner what so ever against any loss and or damages,
directly or indirectly, caused to any party, whether in India,
and or beyond India. All errors and omissions are subject to
rectifications. It is also notified that all the information
given herein either by Garage Equipment & Tools co. and
or by M/s Gedore Germany and or M/s Bolt tech USA is for general
information only and clarifications if any required, they can
contact the respective parties for information. The publication
of this information on the web page is solely for the purpose
of General information about the products offered by M/s Gedore
or M/.s Bolttech. It is possible the Information may not be
complete, and may not contain full details about the range of
products offered. For any further details please contact Garage
Equipment & Tools co. |
|
|
